Eos R6 firmware update

New firmware update for EOS R5, EOS R6 and EOS-1D X Mark III now available to download and install.

Many of the updates are for the EOS R5 with a focus on video functionality like 120/100fpsFHD video and lighter codecs for 8K/4K + CLOG3  the EOS R6 and EOS-1D X Mark III get updates too. I’ve read online that C-LOG3 is planned to come to both EOS R6 and EOS-1D X Mark III in a future release too.

I think I’ll need to revisit my article on full-time manual focus and see if the changes in EOS R5/R6 setting for Electronic full-time MF have any change in the content.

Firmware update 1.3.0 for EOS R5

Download EOS R5 firmware 1.3.0

Firmware Version 1.3.0 incorporates the following fixes and enhancements:

  • Adds [Canon Log 3] to [Canon Log settings]. You can select [Canon Log] or [Canon Log 3] from [Canon Log settings] in the Shooting tab of the menu.
    – Support for RAW movies shot with Canon Log3 and RAW (Light) will be available in Cinema RAW Development and in Digital Photo Professional version in a future update.
    – Digital Photo Professional will also support the processing of RAW movies shot in Canon Log3 settings and the application of Viewing LUT in future update.
  • Adds [RAW (Light)] to the movie recording size and [IPB (Light)] to 8K/4K to enable lower bit rate shooting. These settings can also be selected when RAW+MP4 is set.
  • Adds a high frame rate of 119.9 fps/100.0 fps to the Full HD movie recording size.
  • Adds [Electronic full-time MF] to the AF tab of the menu. When a lens is attached, manual focus adjustment is always possible with both One-shot AF and Servo AF.
  • Adds [6: Monitor Off] to [Shooting info. disp.: Screen info. settings] in the Shooting tab of the menu. This update makes it possible for the camera’s monitor to be turned off at all times during shooting.
  • The transfer time (estimated value) now displays on the camera monitor during FTP transfer.
  • Adds the ability, when transferring images via FTP, to select protected images that failed to be transferred and protected images that have not yet been transferred and transfer them all at once.
  • Adds [Save/load cam settings on card] to the Function settings tab of the menu.
  • This allows you to save the camera settings to a card, or load a saved file and restore the camera to the settings you saved to a card.
  • Fixes a phenomenon, in which, in rare instances, the camera does not function normally when using certain CFexpress cards.
  • Fixes a phenomenon, in which in rare instances, the camera cannot function normally when the drive mode is set to “High-speed continuous shooting” to shoot still images continuously.
  • Fixes a phenomenon in which the power may become suspended when the camera is powered via USB for an extended period of time.

Firmware update 1.3.1 for EOS R6

NOTE: initially firmware 1.3.0 was announced, but was swiftly withdrawn as it was found to have problems when movie cropping was enabled. Version 1.3.1 fixes that problem. If you have any version prior to 1.3.1 it would be good to update your EOS R6.

Download EOS R6 firmware 1.3.1

Firmware Version 1.3.1 incorporates the following fixes and enhancements:

  • Adds [IPB (Light)] to 4K to enable lower bit rate shooting.
  • Adds [Electronic full-time MF] to the AF tab of the menu. When a lens is attached, manual focus adjustment is always possible with both One-shot AF and Servo AF.
  • The transfer time (estimated value) now displays on the camera monitor during FTP transfer.
  • Fixes a phenomenon, in which in rare instances, the camera cannot function normally when the drive mode is set to “High-speed continuous shooting” to shoot still images continuously.
  • Fixes a phenomenon that may corrupt the image displayed in the viewfinder.
  • Fixes a phenomenon in which the power may become suspended when the camera is powered via USB for an extended period of time.
  • Fixes a phenomenon, in which the camera stops to operate normally when the movie cropping setting is set to [Enable] for performing movie shooting in Firmware Version 1.3.0.

Firmware update 1.3.0 for EOS-1D X Mark III

Download EOS-1D X Mark III firmware 1.4.0

Firmware Version 1.4.0 incorporates the following fixes and enhancements:

  • Adds [RAW (Light)] to the movie recording size and [IPB (Light)] to 4K to enable lower bit rate shooting. These settings can also be selected when RAW+MP4 is set.
  • The transfer time (estimated value) now displays on the camera monitor during FTP transfer.
  • Improves communication reliability when using FTP and USB simultaneously.

 


Notes for each firmware

The User Manual has been updated so make sure to download the User Manual as well as the latest firmware for your camera.

The following Applications have been updated accordingly:

  • Camera Connect 2.7.30
  • EOS Utility 3.13.20
  • Digital Photo Professional 4.14.0
  • Canon RAW Plugin 2.2 for Final Cut Pro X
  • Canon RAW Plugin 2.7 for Avid Media Access