EOS-1D X Mark II has a new firmware update available. Firmware version 1.1.3 provides three subtle improvements to the camera operation.
Can says that EOS-1D X Mark II firmware version 1.1.3 improves three functions…
- Corrects a phenomenon in which the drive mode icon is not correctly displayed when using custom shooting modes (C1/C2/C3).
- Changes the maximum number of “Release cycles” displayed from 1,000,000 cycles to 9,999,000 cycles. This value can be checked under the “Camera system information” menu.
- Improves the reliability of communication via USB cable when using the Lens Data Registration function within EOS Utility 3 software.
The Version 1.1.3 firmware being released at this time is for cameras with Firmware Version 1.1.2 or earlier. If the camera’s firmware is already Version 1.1.3, it is not necessary to update the firmware.
When updating the firmware of your camera, please first go over the instructions thoroughly before you download the firmware.
The firmware update takes approximately six minutes.
Personally I’m impressed that the camera internal shutter count now runs to almost 10 million actuations and I wondr how many one million plus actuation cameras there are? It’s only just over a week and a half of photos every second for 24 hours / day.
Looking for a firmware update for another camera?
Try this page where you will find links to download the latest known firmware updates for all Canon EOS cameras